Ergonomic grip for long distances! Perfect fit, cushioning and comfort for the mountainbike
MTB Tech & Trail
BIKE "Trail Tip"
in the grip test of the BIKE magazine (07/20)
Grip size Measurement
Sizes & Weights
(total in mm)
(measured at 1/3 of the total range)
(in g pair)
Clamping on the inside – Comfort in the outside
The 711 optimizes cushioning on the outside in every detail.
The clamping is inside and the clamping sleeve is in the inner third of the grip only. The grip is correspondingly somewhat more difficult to mount. Using a bit of brake cleaner, however, lets it slip onto the handlebar very easily and it is absolutely tight in about five seconds.
Angular and two-dimensional
Handlebars are round, and grips are also mostly round because it is simple.But fingers are anything but round: They easily slip on a round object and cannot hold on unlike, for instance, a flat table corner.
Like a tool in a hand
Only with a perfect fit do you have everything under control and can control the bike.
The Ergobar is a wave-shaped profile on the front and right side, which produces a flat, slightly angular grip bottom.
A perfect fit for angular, bent fingers.
Ergonomics thought out in the detail - and all around.
The slightly wavy shape of the Ergobars maps the different finger lengths of the hand.
As round as necessary and as flat as possible.
In any case for long distances the use of the Innerbarends is recommended.
Grip models 711, 710 and 702 are Innerbarend ready.
- Area of use
- MTB Tech & Trail
- Length (mm)
- Weight (g) / pair
- Circumference(mm) -1/3 of total length
- Available sizes
- S, M, L
The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The scope of delivery includes a set of grips. The clamp moved from the outside to the inside in the course of the product development and is now only at the first (inner) third. This increases the shock absorption and comfort on the hand’s outer side. In addition, the outside surface area was increased using every trick in the book, making it as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: With the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control. The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
The SQlab grip series is free from the following pollutants:
PAH - Polycyclic Aromatic Hydrocarbons (18 pcs. Total)
Phthalates + Propylheptyphtalates:
Short-chain Chlorinated Paraffins
Flame retardant PBB (polybrominated biphenyls) / PBDE (polybrominated diphenyl ethers)
Bisphenol A (BPA)
Furthermore, are the grips 702, 710, 711 and 70X latex free because the thermoplastic elastomers (TPE) used are not based on natural latex.