Comfortable. Aerodynamic. Inside.
Tested several times by Bike Magazine!
"Then, due to an aerodynamic but also more efficient seating position, the speed increased by about 2 km/h without having to exert more effort."
Bike Magazin 02/2020
"Anyone who has ever ridden the Innerbarends® will not give it away again:
More speed, more comfort and relief up to the shoulder and neck."
Bike Magazine 08/2020 even tested and measured different positions with the Innerbarends® in the wind tunnel. The results are impressive:
"57 Watt saving ! This means that depending on the situation, the speed increases by 2 - 5 km/h with the same effort!"
Natural hand position
The SQlab Innerbarends® ensure a natural hand position.
Small and light
The SQlab Innerbarends® 108 g the pair.
Perfect muscle relief
The perfect solution for relieving the strain on muscle groups in the arms, shoulders and back by changing the position of the arms on the bike, especially on long distances.
The aerodynamic, relaxed elbow position ensures maximum speed.
Tag us on your picture with #sqlab and become part of our homepage.
- ARTICLE NUMBER(S)
- AREA OF USE/BICYCLE TYPE
- MTB Tech & Trail
- WEIGHT(S) IN G (PAIR)
- approx. 108
- Fiber-reinforced plastic (FRP)
- CLAMP DIAMETER HANDLEBAR IN MM
- CLAMP WIDTH IN MM
- MAXIMUM TORQUE IN NM
- E-BIKE READY
- DIN/ASTM CATEGORIES
Moving the hand this far inwards positions the elbows such that they can comfortably rest against your torso and also stretches the upper body position slightly more forward. This is both an aerodynamic and biomechanical advantage.
Barends stem from the early days of mountainbiking and are, if required, mounted to the outer ends of the handlebars. From an ergonomic perspective this is a very good idea. In course of time however, as straight bars became less favoured and sales of riser bars increased instead, the bar ends slowly disappeared. Now however, as the rise of mountainbike bars has reduced again and instead the bars have become low and wider, barends make sense again. But with one small difference, we mount the barends inwards of the grips, so called Innerbarends®, that is where the name with the slight contradiction stems came from.
Innerbarends® are a new innovative evolution of the good old barends we know from the early days of mountainbikes, but with a never-before-seen safety aspect. Despite the different hand position, the brake levers always remain in reach. The position somewhat resembles that of an aerobar. The Innerbarends® don’t weigh much, and aren’t in the way, so just give them a try!
The Innerbarends® fit most bikes. They are mounted directly adjacent and inwards of the grips. As most brake levers are long enough that for best brake performance one can and should mount them inboard of the shifter there is usually sufficient space between grips and shifter / brake lever for mounting the inner barends.
The Innerbarends® do not have a specific area of use. They are however ideal for the mountainbike: MTB racing, XC, marathon, trail riding, touring, all mountain but also for Enduro where they provide a perfect riding position for recovery on transition stages. But also on normal bicycle handlebars of trekking bikes or city bikes the Innerbarends® can be very useful.
The pictured handlebar and grips are not included in the scope of delivery.