Grip Size Measurement
The personal grip size is important.
Grip size is the measurement from the tip of the middle fingerr to the crook of the thumb.
In the new SQlab grip series, sizes differ in range, length (only the 702, 710) and shape.
Sizes & Weights
(total in mm)
(measured at 1/3 of the total range)
(in g pair)
Clamping on the inside – Comfort in the outside
The 711 optimizes cushioning on the outside in every detail.
The clamping is inside and the clamping sleeve is in the inner third of the grip only. The grip is correspondingly somewhat more difficult to mount. Using a bit of brake cleaner, however, lets it slip onto the handlebar very easily and it is absolutely tight in about five seconds.
Texture zone 7OX
Angular and two-dimensional
Handlebars are round, and grips are also mostly round because it is simple. But fingers are anything but round: They easily slip on a round object and cannot hold on unlike, for instance, a flat table corner.
Like a tool in a hand
Only with a perfect fit do you have everything under control and can control the bike.
The Ergobar is a wave-shaped profile on the front and right side, which produces a flat, slightly angular grip bottom.
A perfect fit for angular, bent fingers.
Ergonomics thought out in the detail - and all around.
The slightly wavy shape of the Ergobars maps the different finger lengths of the hand.
As round as necessary and as flat as possible.
Pressure measurement at the SQlaboratory
Pressure measurements compared
The left grip is respectively illustrated. Even less ﬁnger pressure is seen above in the front grip area.
In any case for long distances the use of the Innerbarends is recommended.
Grip models 711, 710 and 702 are Innerbarend ready.