Comfortable. Aerodynamic. Inside.
"Then the speed increased by about 2 km/h due to an aerodynamic, but also more efficient sitting position, without having to exert more effort".
Bike Magazine 02/2020
Small & Light
411 R Carbon Innerbarends® 40 g per pair.
The new clamp is constructed in a way that it can be bent open and snaps over the handlebars. This means that they can be mounted or dismounted at any time without much effort.
The carbon fibers are designed to enclose the handlebars when pulled. The screw clamping with two movable "inserts" keeps the force on the fibers low.
The aerodynamic, relaxed elbow position ensures maximum speed.
The natural hand position ensures muscle relaxation and improved biomechanics.
Perfect Muscle Relief
The perfect solution for relieving muscle groups in the arms, shoulders and backs by changing the arm position on the bike, especially over long distances.
- ARTICLE NUMBER(S)
- AREA OF USE/BICYCLE TYPE
- MTB Race
- WEIGHT(S) IN G (PAIR)
- approx. 33
- CLAMP DIAMETER HANDLEBAR IN MM
- CLAMP WIDTH IN MM
- MAXIMUM TORQUE IN NM
- E-BIKE READY
- DIN/ASTM CATEGORIES
More power. More comfort. Less weight.
In other words: 14 watts. Aero position. 39g.
Wide MTB handlebars are good for control on the bike, but bad for wind resistance.
The new, steeper hand position on the Innerbarends® Performance reduces wind resistance, but is less suitable for technical trails.
Perfect when you have a choice.
More comfort is provided by the more relaxed neck muscles and the changed load zones of the hand. This is particularly noticeable over long distances and has a positive effect on performance in the end.
14 watts saved with only 39g extra weight. An internal study by SQlab has shown that the power saving at a speed of 36 h/km was on average 5%.
With the new Innerbarends® Performance the advantages of the material "Carbon" are consistently used. The new clamp is designed so that it can be bent open and snaps over the handlebars. This means that they can be mounted or dismounted at any time without much effort.
The carbon fibers are designed in such a way that they surround the handlebars when pulled. The screw clamp with two movable "inserts" keeps the load on the fibers low.