BIKE "Ergonmic Tip"
"Ergonomic Tip" in the saddle test of the BIKE magazine (07/20)
„The double step of the 6OX almost completely relieves the perineal area and gives the rider an enormous amount of support on the ascent [...]. The movable saddle shell follows the pedalling movement and thus relieves the back.“
The correct width saddle is a prerequisite for maximum performance.
Available widths in cm: 13, 14, 15, 16
More free space - less pressure
Pressure mapping diagram of the SQlab 6OX
The pressure mapping diagram shows an optimal pressure distribution from a medical stand point on the sitbones and pubic bones and almost no pressure in the perineal area.
The SQlab saddle shape with the raised steat surface is already perfectly suited for riding uphill and also provides greater performance to the pedals on level surfaces. Additionally, a special non-slip logo design ensures even more grip toward the back.
The grip material on the raised stage provides additional hold towards the back.
|The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.|
SQlab OX series
For all those who like mountainbiking in the countryside.
Area of use: Gravity & E-Performance
The 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sitbones.
Area of use: MTB Gavity & E-Performance
Area of use: MTB Gravity & E-Performance
The backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill [riding]. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style.
- Width in cm
- Area of use
- Gravity & E-Performance
- Length (mm)
- Weight (g) w/o Elastomere
- Hardness in SQ-shore
- Relief of perineal area (%)
- Material Rails
- Material Cover
- B78 Kevlar
- Material Padding
- Superlight Foam
- Sport (adjustable via 3 elastomers)
- max. Weight (kg)
- Unisex: Due to the sit bone measurement and the step saddle concept, it is not necessary to differentiate between men and women
The new e-bike saddle 6OX combines the advantages of the successful saddle models ERGOWAVE® and ERGOLUX®. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.
The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.
The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.
Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.
The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16 cm
• Scope of delivery: saddle incl. three elastomer dampers (soft, medium, hard)