0 0

Handlebar 311 2.0 - 27.0 low

 
2016_Award_World_Of_MTB
Art.No: 2209
Sitting Position Stretched / Moderate / Slightly Bent Forward
99,95 €
incl. tax, plus * shipping
Delivery in 1-3 working days
Description at a glance

27.0 mm clamping area and including a shim for 31.8 stems. The smaller diameter increases the bar‘s flex properties. The shim - available in both plastic or aluminium – ensures a good fit of the bar in the stem and reduces the stress raisers at the edge of the stem. This little trick increases the bar’s durability and overall strength.

The 16° backsweep provides a natural transition from lower arm to the hand. This is especially important with handlebars of width greater than 700 mm. The 10mm forward reach almost make up for the reduced reach which the higher sweep provides. The 2,5° upsweep bring the elbows into a perfect position for a dynamic riding style.

Only the best in materials are used. Careful and precise bending and manufacturing processes make the SQlab 311 one of the most advanced handlebars on the market.

The handlebar may not be used at bikeparks and for downhill-bikes.

The backsweep largely stems from the motocross arena where a similar backsweep and upsweep is custom. Only if the ergonomics are 100% perfect, you can ride at maximum pace and your body endure the associated high strain in the long run.

Also available in the conventional 31.8 clamping diameter.

The pictured stem is not included in the scope of delivery.

Information backsweep, downsweep ect. 


Technical specifications at a glance
ARTICLE NUMBER(S)
2209 / 2208 / 2207
AREA OF USE/BICYCLE TYPE
MTB Tech & Trail
WEIGHT(S) IN G
approx. 320 / 320 / 320
MATERIAL
Aluminium 7050
WIDTH(S) IN MM
740
MAXIMUM CUTTING WIDTH IN MM
680
RISE IN MM
15 / 25 / 50
BACKSWEEP IN °
16
UPSWEEP IN °
2,5
DOWNSWEEP IN °
0
CLAMP DIAMETER IN MM
27
STEM CLAMPING WIDTH IN MM
Min. 40 - Max. 58
MAXIMUM TORQUE IN NM
8
MAXIMUM SYSTEM WEIGHT ALLOWED IN KG
120
E-BIKE READY
Yes
DIN/ASTM CATEGORIES
3
  • Call / Message