Ergonomic grip for long distances! Perfect fit, cushioning and comfort for the mountainbike
MTB Tech & Trail
VSF certified - Best ergonomics
“The shape
and size concept of SQlab offers an outstanding selection of different grips
for every application. The ergonomic shape effectively supports the hands, the
unusual grip edge provides "grip" and more secure. All models are
available in three sizes, which differ in diameter, length and shape.” VSF
Grip size Measurement
Sizes & Weights
| Modell | Size | Length (total in mm) | Range (measured at 1/3 of the total range) | Weight (in g pair) |
| SQlab 711 | S | 134,8 | 98,0 | 128 |
| SQlab 711 | M | 134,8 | 103,0 | 150 |
| SQlab 711 | L | 134,8 | 112,0 | 186 |
Clamping on the inside – Comfort in the outside
The 711 optimizes cushioning on the outside in every detail.
The clamp is on the inside and the grip is pulled slightly upwards on the outside to provide maximum cushioning.
Secure grip
Angular and two-dimensional
Handlebars are round, and grips are also mostly round because it is simple.But fingers are anything but round: They easily slip on a round object and cannot hold on unlike, for instance, a flat table corner.
round = no grip
angular & two dimensional = perfect grip
Like a tool in a hand
Only with a perfect fit do you have everything under control and can control the bike.
Ergobar
The Ergobar is a wave-shaped profile on the front and right side, which produces a flat, slightly angular grip bottom.
A perfect fit for angular, bent fingers.
Ergonomics thought out in the detail - and all around.
The slightly wavy shape of the Ergobars maps the different finger lengths of the hand.
More surface
As round as necessary and as flat as possible.
Physics: |
low contact area = high pressure
large contact area = low pressure
Innerbarend ready
In any case for long distances the use of the Innerbarends is recommended.
Grip models 711, 710 and 702 are Innerbarend ready.
- ARTICLE NUMBER(S)
- 2375 / 2376 / 2377
- AREA OF USE/BICYCLE TYPE
- MTB Tech & Trail
- MATERIAL
- Shock Absorption Compound
- SIZE(S)
- S / M / L
- CIRCUMFERENCE IN MM (1/3 OF TOTAL LENGTH)
- 98 / 103 / 112
- LENGTH IN MM (LEFT/RIGHT)
- 134,8
- CLAMP DIAMETER HANDLEBAR IN MM
- 22,2
- MATERIAL CLAMPING RINGS
- Aluminium
- MAXIMUM TORQUE IN NM
- 3
- E-BIKE READY
- Yes
- DIN/ASTM CATEGORIES
- 4
The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The scope of delivery includes a set of grips. The clamp moved from the outside to the inside in the course of the product development. This increases the shock absorption and comfort on the hand’s outer side.
In addition, the outside surface area was increased using every trick in the book, making it as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: With the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control.
The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
The SQlab grip series is free from the following pollutants:
.contact "Call / Message")