0 0


atmungsaktiv Created with Sketch.
flatlock-stitching Created with Sketch.
elastische-beinbuendchen Created with Sketch.
ergonomische_passform Created with Sketch.
sqlab.2022.05.Empfehlung.Radfahren.sq.short.oneox.one10 sqlab.2022.04.Empfehlung.Elektro.rad.sq.short.oneox.one10
Art.No: 2483
Sitting Position Moderate/Slightly Bent Forward
119,95 €
incl. tax, plus * shipping
Delivery in 1-3 working days

Waist77 - 81 cm81 - 85 cm85  - 89 cm89  -93 cm93 - 97 cm97 - 101 cm
Hip90 - 94 cm94 - 98 cm98 - 102 cm102 - 106 cm106 - 110 cm110 - 114 cm

Waist: Measure at the narrowest part of the waist. 

Hip: Measure at the strongest point of the butt. 

Hard and thin

The heart of the SQ-Short ONE10 is the 8mm thin pad with a TPE gel.

Out of diapers?

The SQ-Pad 10, has a maximum thickness of 8 mm and initially feels both exceptionally firm and of high quality. Everyone that rides regularly knows that for rides of over 30 min duration, a saddle with thin firm padding is considerably more comfortable than a saddle with thick soft padding. The same is true for a chamois. Most chamois are about 12 mm thick and soft - UNTIL NOW!


The very thin pad becomes more and more comfortable with the increasing distance ridden and adapts wonderfully to the body shape.

Thin layer of orthopedic TPE gel

No shear forces

The pain originates at the periosteum, whereby the pressure is less the problem, but more the shearing forces caused by the pedalling movement. The slight but constant movement of the pelvis on the saddle causes painful shear forces on the periosteum. The SQ-Pad10 trouser pad has a thin layer of orthopaedic TPE gel. This gel was specially developed to absorb shear forces in the medical field.

Several layers

Despite the very flat, only 8 mm thick construction, several layers that are coordinated with each other are concealed in the ONE10 pad.

TPE shear force gel

The TPE shear force gel can optimally develop its property - to absorb the horizontal movements - on the pad underside.

No pressure marks & extra protection

Due to their taut design, the SQ-Pads retain their shape. This means that they are not pushed uncomfortably inwards during pedalling, as is the case with many high, soft pads.

One Size

While width is important for a saddle, a pad for shorts depends on shape. The SQlab pad tends to be wider in the rear area and converges into a very narrow center. The sitting bones thereby seat fully on the maximum shock-absorbing area without creating folds No shortcoming in terms of ergonomics or comfort.

Sitzknochen gewöhnen sich an die Belastung
Tieferliegende Muskel- und Sehnenansätze werden durch weiche Polster gereizt

Why is the SQ Pad hard and thin?

A too soft saddle usually becomes very uncomfortable after approx. 30 – 45 minutes on the bike. The sit bones sink in so far, that sensitive soft tissue such as muscle and tendons are aggravated. After approx. 30 – 40 minutes a dull deep pressing pain sets in. The sinking in of the sit bones also causes the perineal area in men and the lower positioned pubic bone arch in women to be subjected to higher pressure. Specifically soft padding will effectively stop the blood flow. The question now is why we ride taut, slim saddles, but make a soft saddle again with the thick, super-soft padding that we often wear in our cycling shorts. The effect of the soft saddle (in this case: hard saddle + super soft pad) then again leads to the serious impairments of sinking, the restricted blood supply and the increased friction.With the SQlab Pad Technology we have succeeded in eliminating the effect of a soft saddle. After a long development time we have developed an ergonomically high-quality pad with the characteristics hard, thin and firm.

Why haven´t tight trouser pads been around for some time?

Because high-quality foams with better damping features have a higher density and thus lose their breathability. By means of a patented process, we have managed to break up the structures of the very dense foam. The result is a high breathability, comparable to conventional upholstery or even better. The perfect cushioning remains fully intact.

Technical specifications at a glance
2483 / 2484 / 2485 / 2486 / 2487 / 2488
MTB Tour & Travel / Trekking
XS/ S/ M/ L/ XL/ XXL
75% Nylon, 25% Elasthan
SQ-Pad 10
Regular Fit
30° delicates, Do not bleach, Do not tumble dry, Do not iron, Do not dry clean
Description at a glance

Our ONE10 short is a pure underpants and is optimized for this use.

The SQlab liner shorts for all who don't like skintight bibs. The SQ-Pad 10 is maximum 8 mm thin and still tight. The pad consists of a dense and at the same time extremely breathable foam, which is equipped with a thin layer of a TPE gel on the underside. This serves for the optimal absorption of the shearing forces arising during the pedalling movement. 

The SQ Short One10 is made for everyday use and has an ideal cut to wear under your trousers.

To Size Chart


  • breathable, flatlock stitching, elastic leg cuffs
  • Main Fabric: 75% recycled Nylon, 25% Elasthan

Washing Advice: 

  • Delicate laundry 30°, Do not bleach, Do not tumble dry,  Do not iron,   Do not dry clean

If the trousers do not fit please contact our customer service. Cycling shorts are a hygiene article and are generally worn without underwear. Please keep in mind that we cannot take back trousers that have been used extensively.

  • Call / Message