„Made in Germany"
The popular 610 M-D saddle model is now also available in a variant: Made in Germany.
The special feature of the 610 Infinergy® M-D active "Made in Germany" is the foam of the saddle, which no longer consists of classic PU foam, but of the BASF Infinergy® material known from running shoes. This material is very robust and brings comfort to a completely new level, especially in off-road terrain, due to the faster recovery. The cover is not pulled over the entire surface of the saddle, as is the case with classic saddles. There are only "tapes" in the important places. These are connected to the Infinergy® foam automatically and without glue.
Made in Germany: 610 M-D Infinergy® active
The 610 M-D Infinergy® active is suitable for comfort-oriented mountain bikers and sporty trekking riders. The relief of the perineal area is very high at 82%. The popular 610 M-D saddle model is now also available in a version: Made in Germany. Made of BASF Infinergy® material, it offers every cyclist many advantages in terms of comfort, cushioning and back-friendliness. Especially on long tours, off the road, the Infinergy® material raises comfort to a new level due to its fast recovery.
The perfect fit
The prerequisite for optimum relief is a fit that is perfectly adapted to the cyclist, because only in this way can the sit bones be fully supported and the perineal area relieved.
Available widths: 14 / 15 / 16 / 17 cm
Maximum relief of the sensitive areas. The relief in the perineal area is 82%.
The high classic step shape in combination with the maximised dip distributes the body weight to the sit bones. A pressure distribution according to medical criteria.
The SQlab active function, which allows the saddle to easily follow the pedaling motion, becomes softer and smoother. The lateral movement, which increases comfort and is easy on the intervertebral discs, was one of the functions that led to many test victories for SQlab saddles in recent years. The strength of this damping can be adjusted from very soft to almost blocked and adapted to the body weight using the three elastomers included in the scope of delivery. The shell consists of a new plastic/carbon fiber mix and enables the active function via the material flex.
- ARTICLE NUMBER(S)
- 2464 / 2465 / 2466 / 2467
- AREA OF USE/BICYCLE TYPE
- MTB Tour & Travel
- WEIGHT(S) IN G
- approx. 315 / 330 / 344 / 337
- LENGTH(S) IN MM
- approx. 285
- ACTIVE TECHNOLOGY
- Yes - Sport
- MOUNTING HEIGHT IN MM
- approx. 62
- SIZE(S) IN CM (EFFECTIVE SADDLE WIDTH)
- 14 / 15 / 16 /17
- MATERIAL RAILS
- S-Tube (light stainless steel - hollow)
- MATERIAL BASE
- Glass Fibre reinforced Polyamide Compound (PA12 + GF)
- MATERIAL PADDING
- MATERIAL COVER
- Interlock Tapes
- HARDNESS IN SQ-SHORE
- RELIEF OF PERINEAL AREA IN %
- MAXIMUM LOAD IN KG
- MAXIMUM TORQUE IN NM
- E-BIKE READY
- DIN/ASTM CATEGORIES
The 610 M-D Infinergy® active is designed for the comfort-oriented mountain biker and the sporty trekking rider. The relief of the perineal area is high at 82%. The successful saddle model 610 M-D is now also available in a variant: Made in Germany. Consisting of BASF Infinergy® material, this offers every cyclist many advantages in terms of comfort, cushioning, and back-friendliness. Especially on long tours, off the road lifts the Infinergy® material, through its rapid recovery, the comfort to a new level. Especially on long tours, off the road, the Infinergy® material lifts comfort to a new level, through its rapid recovery.
The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only "tapes" in the important places. These are automatically attached to the Infinergy ® foam without any glue.
The SQlab active saddle technology, the saddle follows the pedaling movement, comfort is increased, the intervertebral discs are mobilized and the pressure on the sit bones is minimized. Pain in the lumbar region, especially on longer tours, can thus be reduced.
The timeless design fits perfectly to any bike.
The new active technology, with a softer and easier movement, supports. Through the SQlab active saddle technology, the saddle follows the pedaling movement, the comfort increases, the intervertebral discs are mobilized and the pressure on the sit bones is minimized. Pain in the lumbar region, especially on longer tours, can thus be reduced. Its timeless design fits perfectly to any bike.
+ Made in Germany
+ BASF Infinergy® material
+ Comfortable, cushioning, robust
+ Maximum relief
+ Back friendly
The M-D Line is designed for maximum relief of sensitive areas and allows pressure distribution according to medical criteria. M-D stands for maximized dip and, in combination with the high classic step shape, distributes the body weight to the sit bones.
Made in Germany
The production technology was developed very successfully by Oechsler in Ansbach, a large automotive supplier, for a large sports products manufacturer a few years ago. SQlab and Oechsler then jointly optimized this process for saddles. From an ecological point of view, the local sourcing of SQlab "Made in Germany" products means not only that the long transport route is eliminated, but also that production is extremely efficient and subject to strict German guidelines for harmful substances. Local production, quality assurance and longevity are decisive factors for the SQlab project.